BITUBOARD 30 – 2M X 1M X 3.2MM


BITUBOARD 30 – 2M X 1M X 3.2MM

CHARACTERISTICS

  • Non-bio-degradable
  • Weather, warp, and rot proof
  • Tough and durable
  • Excellent resistance to chemicals
  • Improved puncture resistance
  • Compatible with most waterproofing systems

DESCRIPTION: Bituboard is a multi-layer, asphaltic protection board. It is manufactured by thermally bonding polymer-modified bitumen with selected additives which is then sandwiched between a layer of saturated fiber-glass on one side and anti-stick polyethylene liner on the other.

Fields of application: Bituboard has been designed for use as permanent protection to most waterproofing and dampproofing systems, especially the bitumen-based sheet membrane and coating systems indicated in BS 8102. Bituboard will absorb the impact of aggregate shock, and normal site foot traffic and protect the waterproofing membrane from penetration by the edges of reinforced steel and aggregate during the backfill process and late settlement.

Application Instructions : The application of Bituboard should be carried out when the ambient temperature is between 5°C and 55°C and should avoided in case of extreme weather conditions such as sand storms, rain, etc. Bituboard can be fixed on top of the waterproofing membrane by using a double sided adhesive tape (Watertite TS 15)*, Bitubond N or even by torching (for fixing over torch applied membranes). Once the protection board is fixed in place, supports/props have to be used to keep the boards in place till the adhesive is strong enough to hold the board. Subsequent boards shall be laid continuously by butt fitting the edges. For irregular profiles, the board shall be cut to fit all intersections and protrusions.The butt joints can be sealed with 50mm

Category: