NATIONAL NUTEX 800 : 18 L WHITE

PRODUCT DESCRIPTION

National Nutex is an acrylic co – polymer emulsion based, intermediate texture coating for National Acrylic Rock, National Tile & National Eco Systems. It contains high quality inert fine aggregates and gives a weather resistant, flexible decorative high build texture coating. It is specially formulated to absorb the possible shocks of contraction and expansion of the substrate surfaces. It contains anti fungal and anti bacterial additives.

RECOMMENDED USES

As a high build intermediate texture coating for old & new interior/exterior concrete surfaces, plaster, brickwork, masonry work etc. It can also be used as an intermediate texture coat to hide the surface imperfections. It is mostly used as an intermediate texture coat for National Acrylic Rock. National Tile & National Eco Systems. It is always recommended to over coat with National exterior system. For coloured Nutex it is recommended to over coat with Nationalthane Varnish or National Acrylic Clear.

TECHNICAL DATA

COLOUR, DRY FILM White
FINISH, DRY FILM Light / Medium / Heavy Textures / Matt
VOLUME SOLIDS
(ASTM D2697)
62 ± 2%
SPECIFIC GRAVITY 1.60 ± 0.05
THEORETICAL SPREADING 2.5 – 1.2 M2/LTR (Depends on the surface)
RECOMMENDED DFT
(DRY FILM)
250 – 500 Microns/Coat
RECOMMENDED WFT
(WET FILM)
400 – 805 Microns/Coat
FLASH POINT Water Base

DRYING TIME
Drying time @ 30°C (Temperature, humidity, air movement, film thickness and number of coats all affect the drying time.)

TOUCH DRY 4 – 6 hours
DRY TO RECOAT 24 – 48 hours
FULL DRY 48 hours
Category: